WTT 3rd Gen 4Runner 2.5 Rear King Shocks

King Rear w/Reservoir shocks for 3rd Gen 4Runner

No adjuster

Part number 25001-334

Purchased brand new in July 2020

Selling because I prefer to perform a rear shock relocation, and since I just put on Bilstein 5100's in the rear as a temp replacement, they should last me long enough until I start welding.

Disclosure: one of the rear shocks needs to get the reservoir replaced. I was quoted $60 at one shop and $85 at another shop.

I am including a new reservoir as King supplied one, as well as a replacement sticker.

The rear shocks were installed in late September of 2020 and used for less than 10k miles. I used a Durobump extended bump stop to prevent damage upon compression; I take care of my stuff.

Aside from scratching/dirt/etc, they are awesome shocks with the exception of one needing the reservoir replaced.

Looking for King 10" 2.0 shocks, without reservoir OK.

They will come in the factory box as I still have it.

Shocks as they are now -





Replacement reservoir -



Just an idea of how well they flex -

 

Forgot I had these in storage

Bump!

 

Price

 

Pm sent

 

Was that tire damage?? How are the bearings

 

No damage; sway bar made contact with the reservoir.

Hence a reservoir is provided for replacement.

In the middle of a move, starting school, and having put in my 2 weeks at a 10 year job, has put getting the reservoir replaced low on the priority list.

Have a buddy in town that'd replace it for free (including nitrogen recharge), but my shocks are in the storage 2.5hrs away where I'm moving to.

 

So its just a big rub no mayor functional damage???

 

Reservoir needs replacing, as mentioned above.

The shock still retained pressure, but I'm the type that's cautious about things so I opted to remove them.

 

Dm