What size tire/rim can I fit on a 2015 TRD Pro

New to the forum guys. Got a 2015 Pro. They come stock with I believe a 2 inch lift and 265/70/R16 on TRD beadlock rims. So l like the rim but also willing to go another direction. I was a little disappointed on how low it looks to the ground. Looking to go a little bigger without lifting it more and really dont want to get into trimming. What size tire/rims can I move too?

 

265/75/16 for and extra inch (half inch more ground clearance).
Icon aal in the back for an extra 1.5 inch lift. 2 inch if you leave the overload spring in.

 

How hard was it to get that truck? I have never seen one . I got first dibs on the 2017 from my favorite dealer. But ordered a 2016-TRD-OffRoad to hold me over.

 

locally impossible. I watched them around the country but they were selling fast especially in black. White was much easier to find. Made the mistake of trying to negotiate with the dealers. One they dont negotiate on these at all. Two they dont like out of state sales. By doing this it cost me probably an extra $2K as I could have gotten one about 3 hrs from me for that 2K cheaper. Instead I bought one in Chicago site unseen and had it trucked to Charlotte. So if your on a list and that gets you want you want stay there. My route is not recommended. Love the truck through.

 

1truckdriver thanks for the reply. I was hoping to get somewhere around 285/70 maybe R17's. Guessing this means I'll need more than just new tires and rims to get this done

 

Nice looking truck

 

Some self clearancing 42's on H1 beadlocks should do the trick.

 

No. They will not fit without cutting.

This is the largest you can go. Is exactly what I have with the Baja Pro which is the same height as the Pro. Though I am running 265/70R17s (same overall size as 265/75R16s).

Edit: BTW Welcome to TW. Nice looking truck!

 

Do you have a pic of what yours looks like with this setup?

 

In my thread here:
https://www.tacomaworld.com/threads/baja-tx-pro-kit-icon-aal.385619/

 

i have 265/75/16's on my Pro with icon aal, with overload removed,, 1 inch of rake,, just right,,,,,

 

255/85/16s fit with no modifications as well. I ditched the mudflaps before the new tires, so no idea if those will rub. I added a Toytec top plate spacer and Wheeler's 3 leaf AAL to handle the extra weight I have, and still don't rub at full flex with no swaybar. The extra half inch of ground clearance doesn't sound like much, but it helped me get through some spots around here that people with 265/75/16s were hanging up on.

 

With the top plate spacer and AAL in the back, 285/75/16s would go on with minor trimming and maybe a little CMC. I'm putting 35s on in the fall with no more lift than I have now, so I'll be trimming some.

 

Really old post but question with the Toytec trd pro specific 1” spacer and 1.5” icon progressive aal can I get 285/75r16 without doing cmc thank you

 

What rims are those? I really like em