Tred Pro Mounting Dimensions Needed

Can somebody provide mounting dimensions for Tred Pro?

Need distance between mounting holes, horizontally and vertically.

 

Bump....

 

Don't have mine with me or I'd measure but I do know they're identical to Maxxtrax if that helps. I bought the maxxtrax mounts from Leitner designs for my bed rack and my tredpros mount PERFECTLY on them.

If I remember I'll measure them when I get home tonight

 

So you're saying the pin holes are identical to this:

 

Chad, I will have that for you tonight.

 

The 270MM is exact for sure as the mounts I bought are none adjustable there so the "eye holes" are exact same size and the distance apart is the exact same.

The 890mm length I'll have to verify as the mounts I bought are adjustable there so that might be different.

 

well its CLOSE, close enough I think the schematic is correct and its my measurements that are slightly off:

measured 35 and 1/2-5/8" across (901-904.7mm vs 890mm official maxtrax). I measured halfway between each eyelit though where it looks like the official maxtrax measurement is from the inner "round" part of the eyelits which is closer that measuring from halfway.

10 and 1/2" height (266.7mm vs 270mm official maxtrax)

Hope this helps! Maybe another member can measure as well to make sure...

 

It helps a ton. Thanks!!!!

 

i have the voodoo maxtrax mounts you have for the bed rack and they worked with my tred pros

 

Not the tred pros, but the 1100s numbers.

 

The

Max tracks mounts work for tred pros??

 

Can't speak for all of them but my Leitner design Maxtrax mounts work for my tredpros perfectly.

 

Our MAX Modular Traction Board Brackets work with MAXTRAX, MAXSA, and Tred Pro traction boards.

https://www.max-modular.com/shop-max-modular/traction-board-brackets

 

Reviving an old thread. My maxtrax mounts line up perfect with the tred pro, but the maxtrax MKII pins are to short. Top plastic piece and 1/2 the 2nd makes it through. If I use it they are loose. Which pins did you use? Did you use the extreme pins?

 

I want to know if these will work with my Actiontrax.. the pin measurements are 10.5 width, and 34.5" length... center pin to center pin...