Skinny 35s in 2023?

Looking for skinnier 35 ATs. You know,.some that aren't 12.5" wide. Is there anything available?

Lots of old threads asking this question with no real results.

 

Kenda Klever 35 10.5r17 are an option. I’ve had them for about 1000 miles and I like them a lot. I also saw Mickey Thompson 255 85r17 when I was looking. There are some posts on here about both and people seemed happy with both when I last looked.

 

Toyo and nitto has 35/11.5

35s really only measure about 33.5 when mounted under load.

 

Falken has a new r/t in 35x11.5r17

 

Mickey Thompson Baja Boss A/T LT255/86R17 35x10r17

 

I’ll have pics this weekend of the Falken r/t mounted. 35x11.5r17

 

Just installed Falken Wildpeak R/T 35x11.5r17

 

Damn those are beefy.

 

Swapped out AT3Ws. These are just about as smooth on the freeway. No noticeable noise difference

 

what’s the point of those now
People got Klever because they were $150
Now they’re like $320

 

Ordered a spare 35x10.50r17 last night from walmart.com. $258 OTD. Free shipping

 

My concern with those is the c rated sidewall.

 

What all got cut for this? Besides cmc and pinch weld

 

I wish someone made a 255/90r16

 

Glad for this thread. My Goodyear MT-Rs in 275/80R17s are shot and discontinued. Nice to see the skinny options.

 

2” fender trim. CBI front bumper creates more clearance as well.

 

How much backspacing do your wheels have compared to stock?

 

I wonder how much of an issue that is on modern tires? Is the concern that they will get punctures in sharp rock scenarios?
I ran 2 set of AT3W 34x11.5r17 in Load Range E. Great tire all around but way too stiff for a Tacoma, IMO. I'll never run E rated again now that I've ran 35/12.50 MT Baja M/Ts in Load Range D and the new Goodyear Territory 315/70r17 in load range C. So much more comfortable, don't have to run them at such a low psi to get proper contact.

 

Sorry, just seeing this. 4.75 backspace on these wheels

 

I need this in my life