silver truck with rims

hey guys

We have a 2010 silver tacoma with the factory steel wheels. Its time for new tires so i was going to look into some wheels to. Post whatever you have anything is prolly better than the steel wheels lol. If your wheels are aftermarket post the offset please, Im wanting to try and stay inside the fenders with a 16in maybe 17s. Also im torn between bfg ko2, general at2, and the cooper discoverer atp. Let me know if you have any experience with these tires. Truck will see highway and some mud. Thank you for any help guys.

 

I don't have any pictures to share, but if you're looking to keep the new wheels flush, or within the fenders, you'll want to run a wheel that is 8 to 8.5-inches wide with an offset range +6mm to +12mm.

I think the American Outlaw Ranger will look sharp on your Silver Taco. American Outlaw offers this model in 16x8 with a +10mm offset which is right up your alley; see the link below for details.

16x8 ET+10 American Outlaw Ranger | Discount Tire Direct

 

I was looking at the vision warrior 375 but they only have a 0 offset

 

I know mines a 1st gen but I'm running 16x8 mickey Thompson classic 3s with 0.00 offset. They are right at flush with my factory flares. Also running 265x75 nitto terra graps.

 

You're right, the 16x8 only comes with 0 offset. These dimensions work, but the front lip of the wheel will sit ~0.50-inch to 0.75-inch outside of the fender.

Looks sharp!

 

Looks sharp![/QUOTE]

Thanks man!

 

I also think theses wheels would look good for stick

 

Nitto Terra Grapplers G2 275/70-17's. The 4Runner SR5 rims look nice.

 

Same here.... 4 Runner SR5 but with BFG's 275/70/17's (32") with Bilstein 5100's all around

 

2012 silver dcsb bolt ultra 17x8.5 can't remember the off set. With 265/70 17 general at2.