Sacrifice's Crunchy Taco

Instagram : Moto_Adv_Chris
Mods:
Armor:
BAMF sliders
Pelfreybilt Front Bumper w/ full hoops
RuffStuff Diff Diaper (not installed)
4xInnovations Skid Set

Suspension:
Front:
OME shocks/886 springs
Wheeler's Front SuperBumps

Rear:
ADS Rear 2.5s w/ Resi
Deaver U402 leafs
ADS 2.125 Rear Hydro Bumps

Wheels/Tires:
315/75/16 Cooper STT Pros
16x8 -10 offset Level8 MK6 Matte Black w/ full sized spare

Electronics:
Ultragauge
CB Radio - Uniden520xlpro, firestik 4ft firefly, hood mount
Smittybilt XRC 12k w/ synthetic lead
VIAIR Constant Duty OBA

$455 Whynter FM-45G 45 Quart Portable Refrigerator and Deep Freezer Chest, AC 110V/ DC 12V, Real Chest Freezer for Car, Home, Camping, and RV with -8°F to 50°F Temperature Range, Gray

Whynter FM-45G Fridge

Lighting:
TRS Mini D2S Retrofits w/ bhlm
OKLED 2x2 Flood Beam Pods

Other:
Color matched grill
Airflow Snorkel
Rear diff breather
Pelfreybilt Hi-Lift Mount
Pelfreybilt Bedside Supports
48in Hi-Lift
Prinsu Cabrac

 

Subd, cuz we have the same truck. You think your just adding a some small mods now, but this place is addicting.

 

i already want more stuff but all i can do is till i have the money.

 

Got my ultragauge installed. I put it on the steering column. I know most second gens don't buy the only thing it blocks is my odometer which I only check for estimating gas mileage. Didnt have to take off any plastic or anything to feed the wires under the column which was nice. Just wish the mount was a little more horizontal but i can see it perfectly still.

Edit: this didnt work out as well as I thought. The steering wheel hits it, so I'm going to try to move it. Already got the sticky mount off.

 

Update: moved the ultragauge so it only blocks the left turn signal, cruise, and headlight indicators. It's attached to the speedo bezel and steering column with a small piece under the right side of the bracket.

 

Hit 1000 miles on my way home and my retrofits got here!

 

How good are your tires? In the 30 and under BS thread you're saying you want to get sliders. I'd get tires that could get me to a place that I'd need sliders before I bought sliders. Just my $.02.

 

Just stock tires. I think they will do for a while since there are trails for stock trucks where I will go. But I also want sliders for ding protection also.

 

Finally warm enough day to put on a sticker in remembrance of a college friend who passed last year.

 

Ordered a shackle receiver and pin lock from Amazon today in hopes to do some wheeling here in a couple weeks. figured id try the locking pin below also

$48 SmittyBilt 2IN RECEIVER CLEVIS BLK - SB29312B

shackle receiver

$27 TRIMAX T-3BLACK Premium 5/8" Key Receiver Lock Rugged Black epoxy Powder Coat

locking pin

 

also decided to order

superwhite paint for the grill due to this writeup and this oil catch can

along with a fumoto valve also when it comes for oil change time.

almost wanted to order BAMF sliders since they were the deal of the day but decided to wait some time before making that big of a purchase

 

subbed. You know i'll be lurking this shit.

 

sub'd for a mini-me super white

 

White double cab what?

 

Offroad! Just hasn't been yet

 

Installed the catch can today at 1561 miles. So it should keep the engine clean throughout its entire life. Made a small bracket out of 22 gauge sheet metal so I could use factory holes. Not the best but I will probably redo it eventually.

 

Nothing major but I started my new job today and when I got home my shackle receiver with lock was here so they got put on.

Edit: forgot I also got my fumoto valve for oil changes. This way ill never have to mess with taking the bolt out or it getting stripped somehow.

I also checked my catch can since it has been on 100 miles already. Lets just say it is nasty. Definitely some fuel, oil and water vapor. My hand even smells like the mix but I didn't get any on me.

 

Before they break they are gone!

 

That's day one stuff! Get after it!