Procomp 6 inch lift

I've seen a lot of ppl having problems with their vsc while running 17" I'm fixing to run the procomp 6 inch lift with 20x9 fuel nutz and 275/65/20 nitro terra grappler G2 anyone know if that'll mess up my vsc? I'm just afraid of putting it on and having problems with that and I don't won't that! Thanks!

 

Should be fine after a zero point calibration. Do yourself a favor and go with Maxtrac spindles instead of anything Procomp. Unless it's to late......

 

Are the procomps not any good?

 

Bottom of the barrel

If you intend to stay prerunner with standard travel... maxtracs 6.5 or 4inch with some icon coilovers at 2 inch would be dope

 

Bad thing is i done bought the 6 inch procomp lift and I gotta say I got a really good deal on it that's why I bought it and didn't look into any other options but I guess we'll see how it all turns out.

 

Try it out.. if it doesnt ride great... come here for options before spending another dime.

As far as vsc, some have issues some dont

 

Yeah ima give it a try if I don't like the ride or anything I'm deff taking it off and going to look into something else I sure am gonna look into it deeper before I decide on buying anything else tho!

 

So you changed your mind on cutting the front cross member?

 

Well im still going to go with the procomp 6inch lift but like I was saying if I don't like the ride or if i have any problems with it I'm taking it off and going with something else

 

What do you mean something else? Like as in if you don't like the Procomp lift you'll switch to a different drop bracket lift?

 

Yeah I'll just go with a different brand or maybe instead of suspension lift go with a body lift idk but I'm installing the procomp here in the next week or so

 

Post up some pics when its all done. 6 in lift is beast

 

I sure will I'll upload some pics of how it is now I just really haven't had time been getting home from work and it's dark outside so really haven't had a good pic of it since I installed my 20" fuel nutz I just have an older pic of when I first purchased the truck and had tinted the windows

 

The problem is, once you cut the crossmember there is no "going back" , the damage will be done. A shame really, but people who dont know better do it all the time i guess.

 

I thought the 05 and up you did not have to cut just 04 down I may be wrong tho

 

If he is a prerunner you don't have to cut the crossmember.

 

If you got the basic kit you can always get the full length rcd bilstein shocks for up front so you don't have to install the tall top hat spacer and your original shock/coil set up.


Bilstein f4-be5-e122-to

 

Yeah I've been looking into just getting the full leangth instead of using the front strut but not sure on what would be good

 

Are you doing the coilover kit or just the standard system? They aren't bottom of the barrel, Rough Country is worse than PC. PC also has their PC Promise which covers the entire truck 5yr/60k miles.
http://www.procompusa.com/warranty

We have installed numerous of them, most of the VSC issues is to due with the alignment.