PA system install

Question to anyone who can help me. I just purchased a pa system to install in my Tacoma and wondering where a decent spot to install the speaker is.

PA system I purchased:

$72 Xprite 8 Tones 200 Watt Emergency Warning Siren Extra Slim Speaker PA System Kit w/Handheld Microphone & 2 Lights Control Switches

https://www.amazon.com/dp/B01DMRDTXM?ref=ppx_yo2ov_dt_b_product_details

 

Probably up front in the grille, next to the factory horn

 

If the 3rd gens are anything like the 2nd gens, there's a lone bolt on the passenger side of the upper radiator support. Swap the bolt to a grade 8 from Lowes, then use a piece of angle iron to make the tight 90* so the speaker hangs "flat" between the grille and the radiator.

Been hanging a 100W speaker of similar design to that kit off that bolt for a few years now.

Edit: The bolt just under the winch remote cable in the black square thingy.

 

My siren speaker is mounted to the crossmember like the horns are. It's a whelen slim speaker and fits perfectly. I'll take a picture tomorrow.

 

Still raining, I'll get you a pic tomorrow.

 

You can also mount em to the aluminum inner bumper, Whelen makes a bracket for the gen 2 taco's that mounts on the driver side crash bar.

 

It's on a piece of Diamond plate another member gifted me.