NRG Bucket Seats

Hey, I was just wondering what would be needed or if its possible to install an NRG bucket seat into a 2015 2nd gen? Sorry if this is stupid, I'm new to this.

 

Maybe Could see possible airbag problems

 

Like the passenger airbag or something with the ecu?

 

You would just need to proper resistor in the plug under the seat that corresponds to the airbag, I'm not sure what ohm it would require but you can always check with a multimeter. As far as the bracket you're not going to find anything that is ready to bolt in but I don't imagine getting a NRG or universal bracket to fit would take a ton of work, maybe some spacers or brackets to relocate bolt holes, etc. Seats are a somewhat common mod across all platforms, I remember all the seat mods from my Subaru days well. Good luck man!

 

Beyond the airbag issue you will need mounts like this:

https://wedgebrackets.com/toyota-tacoma-05-seat-brackets.html

Or this is a bit cheaper with locking sliders:

https://corbeau.com/toyota-tacoma-2005-2015-seat-brackets/

 

Thanks for the help man, ill get on that asap

 

Thanks