Microbypass for Pioneer avhx5800 help

Hey guys, so I just installed a pioneer avhx5800 in my 2013 Toyota tacoma. I used the

$72 crux swrty 61n radio replacement with SWC & OE RVC retention (for toyota vehicles 2012-up)

crux swrty 61n for my harness to keep my steering wheel controls, usb, and aux. I didn't need the included plug ins for my rear view camera because mine is in the rear view mirror.
I added the micro bypass from Amazon that everyone seems to use that comes with the small plastic bag with instructions. I connected the black wire on the MB to the black ground wire on the pioneer harness. I connected the blue wire on the MB to the amp turn on blue/white wire on the pioneer harness and finally I connected the green parking brake wire on the MB to the light green parking brake wire on the pioneer harness. However, the headunit will not play video when the parking brake is off AND on. It plays the audio though. Have I done something wrong or is the microbypass possibly defective? Any help would be appreciated. Thanks.

Also I initially had the green wire on the MB wired into the pioneer light green parking brake wire AND the black/yellow parking brake wire on the crux harness and it didn't work. So I capped the crux black/yellow wire and just connected the two green parking brake wires, but still no luck.