Mickey Thompson Classic II doesn't fit my 2nd Gen

Well good for you then. The set I had were terrible on my truck so i sold them to my brother in law. He put them on his chevy, with the hub centric rings i got from Rimzone with my XD's. He loves em. I helped him put them on, I think they fit his truck better for some reason. I had the -22 offset on mine, but they were no good for me.

 

I'm pretty sure the classic locks fit, they have a different offset

 

What is really wierd is when I test fit Chris' on my truck it wasn't even close to rubbing the caliper.

 

So as a follow-up, I ended up ordering the MT II's (since I tried test-fitting Chris' on my truck). The ones that came in do not fit. WTF?

 

Sorry to hear that. On a side note, all other wheels I like are backordered, or discontinued. I decided to slow down and take the summer to figure out what fits, what I like, and what is available.

 

The only other conclusion I can come to is that their manufacturing tolerances are just soo far out there. I'm going to meet up with Chris tomorrow to check the backspacing on his. Wondering if maybe they sent him the 3.625" backspacing by accident and he got lucky. May go with the Classic Locks instead but that makes me nervous too.

 

OK, an update. The Classic II's fit with the 3.625" backspacing. Very little rubbing with the 265/75r16's and Bilsteins set at 1.75" on the front. Pics to follow shortly.

 

Pics

 

How about a side view to see how far they stick out

 

Will snap some in the morning. Looks good. Sticks out about 1/2" or a little more from the fender. Gives it a nice wide stance.

 

I just installed the Classis II's on my 2011 and had no problem with clearance.............. on 3 of the 4 wheels I ordered lol. The one wheel was boxed wrong. The correct MF# is 1268411 with the 4 7/16" backspacing not the 1268412. They ordered me another wheel and 3 days later it showed up......... wrong again. 3rd time is a charm right? anyways the next one should be in on Monday. Hopefully it works. Anyways no other problem with the wheels. I'll post pics sometime in the next few days

 

So the 4-7/16" backspacing fits the 2011's?

 

Yeah running them right now

 

Good to know. It's amazing how it's hit or miss with these wheels.

 

so im looking to buy a set of the MT classic II's they are 16 x 10's, anyone know if those will fit? i have 1.5" spacers if needed, but id rather not use them.

 

I have an 06 and am looking at the 16x8s but Im about afraid to buy a set because of them supposedly not fitting and I really dont want the wheels to stick out much if any past the fenderflares.I will be running the stock size 245s or a 265-75 x 16 would be the biggest I would go with.I have heard either a 4 7/16" or a 3 5/8" Backspacing will fit but Im just not sure.I hate to order them and have 2 ship them right back because they dont fit!

 

Anyone running these on their 13 tacomas?


I would love to get a set to run with my 255/85r16s but don't know now if they will fit or not.

 

I want to run 15th with -22 on some 31s. Anyone doing this? Oh with a 3in lift