KTJO Power Folding Mirrors Tacoma 3rd gen

Has anybody installed the KTJO Power Folding Mirrors on a 3rd gen Tacoma with MTM? Wondering if the cameras are in the way of the hinge.
Technical expertise appreciated.

TACOMA POWER FOLDING MIRRORS - INSTALLATION GUIDE - KTJO 4x4

 

we’ve installed them on the 4runner, not exactly the same but I’d be willing to bet it’s at least a 75% the same process.
Any specific questions about the process?

 

The install guide is pretty detailed. The only question I have now is if the MTM cameras in the mirrors would be in the way of the electric hinge?

 

The 4runner's weren't. I'm fairly certain that the taco will be the same kind of deal, BUT... if you just give them (KTJO) a call they should be able t answer that quickly.

 

I installed the wiring on the driver side but did not modify the mirrors yet. However, I connected the stock mirror wiring to the mirror harness connector in the door. After reconnecting the battery, all other old functions work-except for the turn signals. When locking and unlocking with the fob, the rear left turn signals are weak and the some crackling noise is coming from the left taillight/tailgate lock area. When setting the turn signal right, all turn signals work-but in a faster than normal sequence.
I doubt it is the fact that I did not connect the two wires per side for the motors.
It is. 2023 TRD OR DCSH. LED package.
Any ideas what the issue could be? Thanks in advance

 

It shot the resistor... Took all the wiring out and back to stock for now. Will run some wire from the fuse box to the switch and operate the mirrors manually with the switch provided by TKJO.

 

Finally had some time to re-address this project - only to find out that I had received a return box and the folks that returned it had sawed and drilled the plastic of the mirrors probably to make them fit another model they are not designed for. Sent the box back to the company and hope I will receive new items and can start the project over.

 

Dang. Sorry my friend. Ktjo is pretty infamous. There some threads about the issues with the products. I do have the drivers side grab handle, install was, well different. I like the bowl lights but apparently those sparkles you heard have been common with all the products.
The fiasco that happened for the drivers side grab handle was incredible. Half the order, literally half of the item was shipped out separate from the rest of the pieces. And there was some mix ups with whom got what and when. Despite the preorder it seemed to be random for a lot of people. I was smart/dumb enough to tag along on the second order. I do grab that handle all the time getting into the truck