Gen 1 Tacoma wiring diagram? looking for turn signal wires before the blinker

I was wondering where I might find a wiring schematic? I am looking for the turn signals leads where they would be a constant 12V - not near the lights where they are blinkers 0/12V 0/12V... anyone know where I might find that information? I am using my new light which is actually (6) 3/4" single LEDs each front corner, for both running and turn signals - I want to add a relay so if they are active as running lights (night) - the relay turns them off when the blinker comes on - I finally figured out how to accomplish this - but need the steady 12V turn signal for the relay) . I searched "markofshame.com" but couldn't find the actual wires...

 

You don't say what year or model, so I'll just throw this out there:

 

2002! thank you

 

Look around every Toyota Vehicle has it`s own Electrical Wiring Diagrams for every year.

The bad part is Every year might be different using the wrong year can be frustrating.

 

I have found two diagrams that claim the wires in question are Green and Green-White with a Blue-Red associated. Now I can't locate the wires under the dash. Any idea where I can find them?

 

The easy place to access all the wires you need Is the connector under the drivers seat

Where the Rear Harness goes to the back of the truck. I hate working under the dash I need to pull the Door and the seat to work left of the steering column .

Also the same wires can be accessed where the combination switch plugs into the harness attached to the steering column

Now when I hooked up my LED lights I picked up the wiring at the front marker and turn signals because I used lights instead of bulbs having the dual function

 

I am looking at the same concept, curious if you ever drew up a diagram of what you did? Thanks