FXR projectors, halo, shroud and misc

I am asking $275 and that will include UPS ground shipping to the lower 48.

Rather sell as a whole than split up. Everything bought from TRS. The projectors are still in the shroud via JB Weld and tape. This is the part that requires patience to remove before you begin your retrofit. I also have a .pdf I can send you with step-by-step instructions that I pulled off the web.

These items are roughly 5 years old but still work great.
Bi-xenon FX-R Stage III (originally paid $395) includes:
2x FX-R 3.0 (3" Lens/LHD)
2x Morimoto XB35 Ballasts (35W)
2x Morimoto XB Ballast Igniter (D2S)
1x MotoControl Bixenon Wire harness: H4/9003

Last year I bought these items to overhaul my retrofit:
2x D2S: OSRAM Xenarc 66240 Night Breaker (B-66240XNL) (paid $140)
2x Apollo 3.0 Shrouds (paid $30)
2x 80mm: Profile Pivot Halo Ring w/ Driver (Switchback colors are white/orange) (paid $60)

 

If you ever split I’ll take the 2 ballasts. lmk.

 

Do you have a picture of what they would look like completed?

 

https://www.tacomaworld.com/threads/retrofit-headlights-group-buy-05-15.705647/page-3#post-25104735
This link has some good pics and where the pics below I grabbed from. The 80mm Halo will sit on the outside of the Apollo Shroud like this. This set up they did the BLM mod and also painted the reflector which is a great look as the halo becomes your turn signal and DRL.



Another good pic. They skipped the BLM mod and left all chrome. Again the halo would go on the outside of the shroud so imagine the white ring sitting there.

 

Pmd u

 

PM responded.