Driver side apron, can’t find..

Can’t seem to find a driver side apron anywhere. Anyone had this problem before?

 

Anyone have any advice?!

 

Are you talking about the inner fender liner that keeps water out of the engine bay?

There are some aftermarket ones available on Amazon:

$100 Set of Splash Shields with Clips for Toyota Tacoma 1995-2004 All Models (Fender Liners, Aprons, Guards, Skirts, Seals)

https://www.amazon.com/Splash-Shields-Toyota-1995-2004-Liners/dp/B07NKGLG3T/

I purchased an aftermarket set from this company: https://geartechcustoms.com/shop/ols/products/1st-generation-tacoma-engine-splash-guards-95-04

Looks like the OEM ones are still available, and may actually be cheaper than the aftermarket options. If you only need the drivers side you can probably save a little money. I think I might order a set....

https://parts.mcgeorgetoyota.com/oem-parts/toyota-mud-guard-front-5373804020
https://parts.mcgeorgetoyota.com/oem-parts/toyota-mud-guard-front-5373804040

 

I have no idea what a apron is when on a vehicle .

Might be why no responses.

 

Someone on here cuts thick upgraded ones. Might research that too

 

Inner fender?

 

If you are looking for 5370204201, the drivers side inner fender apron, you are going to struggle to find OEM parts. It's been discontinued for few years and most of the US stock is gone. I think your options are to find a donor truck or go with China made pattern parts.

 

here's the thread you need: https://www.tacomaworld.com/threads/pdf-template-for-splash-guard-fender-liner-thingies.654551/

 

Thank you sir for sharing the link.

 

I don’t need the inner fenders, I need what they call and apron its what then fender and inner fenders go onto

 

See if this is what you need. Normally that part is called a "fender seal", but ...

1995 Toyota Tacoma 3.4L V6 A/T 4WD DLX Extended Cab Pickup Fleetside Mud Guard (Front) - 53738AD020 | Toyota Parts Superstore, Lakeland FL (stonemttoyota.com)

 

Interesting that this thread appeared as the fender / splash seals on my 02 are starting to fall apart.

 

Please take a picture of what you need or where it should go!!

We really need the help !!

 

https://radrubberdesign.com/product-category/tacoma/

 

I’ll get some pictures when I’m off work

 

It’s what connects the core support to the cab

 

The 5 lug 2wd and the 4x4 / PreRunner are different in the front clip .

What are we dealing with ? All the Factory parts are long obsolete !

Looking the only parts I can find called the apron assembly is what is called the common name of inner fender .

The inner fender and the outer fender are the only parts listed again long obsolete .On the 4x4

Not sure what your doing but the best option is a used front clip .

Best of Luck!

 

This

 

Here my truck and this is the part that’s I’m needing…