Depin H11 Male

Hey guys. I made splitters to run two lights off each of the OEM female H11 fog light connectors. Unfortunately I learned too late that Toyota uses the green wire in the connector as ground.

How can I depin the H11 male connector to swap the terminals? Every instructional video I've found only depins does the female connector. I've also poked and prodded in the male connector but had no success.

Male H11 connectors for reference:

 

If you use a tiny flathead, you can slide it in next to the terminal sticking out and pry back the tab holding the terminal in. You can also pick up a bag of those connectors with terminals and seals for cheap if you break it.

 

Appreciate it. A little more creativity with my tool and a proper tug got them right out.

 

A 3rd Hand would also assist.