CRF300L Rally fit in a Gen 3 with 6 foot bed

I have a '21 TRD Sport with a 6 foot bed and I also have a WR250R. I am considering ordering a Honda CRF300l Rally. Has anyone carried a CRF300L in a 6 foot bed diagonally?

 

I had my Hayabusa on a front tire chock and tailgate down, in my 2016 AC Sport. It had the 6 foot bed. Used a rear tire basket to help hold in the rear, and bar dancers and rachet straps up front. Made it Cincinnati to Milwaukee no issues.



So yours should fit no issues.

 

I looked at the specs on the CRF300 Rally and it's wheelbase is 57.2" which is about 1" shorter than my KTM 500EXC-F (58.3"). I can fit my bike in the back of my 6 foot bed with the tailgate up if I put it diagonally.

It's kind of hard to see in this picture, but it works.

 

2nd / 3rd Gen same size bed. My 250l was little precarious diagonally. I don’t like the rail track system for tying down bikes. Too weak.

 

Math my friend, you can doooo thisssss !!!
BTW, getting it "in" the truck bed is the easy part. Lots of youtube vids though of getting it back out ;-)

a = Length of bed
b = Width of bed
sq root of c= must be less than the overall length of bike by as much as you feel comfortable with

a^2 + b^2 = c^2

https://www.wolframalpha.com/

 

You'll be fine. Here's my KLR Versys 650 in the bed of mine with a 3500lbs trailer on the back.

 

KLE?

KLR, no ...

 

Not a Rally specifically, but pretty much any small Enduro will fit diagonally. I only ever carry them straight in, tailgate down though...

Rally wheelbase should be same as standard CRF, which should be damn close to a WRR.

 

Brain wasn't working at the time. You're indeed correct.