Crankshaft Position Sensor Location and fixing

Okay, so I’ve got a v4 2013 Tacoma and it recently has been giving me some problems. Intermittently it will die when coming to a stop or if a start it in the morning and let it warm up. It usually won’t leave a code and will fire right back up fine. The two times it hasn’t started after dying it leaves me with a pO335 code. The first time it wouldn’t start I had the radio on while it was off and I jumped it so I figured the battery was a little low. The second time I was out in the pasture with no one to jump so I disconnected battery cables and reconnected them and it started up. Both times it left me with the p0335 code. I’m not the most mechanical individual but I’m happy to frustrate myself attempting to fix it. I can’t find anywhere online where the location of the crank shaft sensor is on that model. Any suggestions on where to look and how to fix it?

Many thanks

 

Have you seen this?
Looks like the A/C Compressor has to be moved to access it?
See post #5 and #8.
https://www.tacomaworld.com/threads/2-7-crank-shaft-position-sensor.431519/

 

Many thanks

 

uually set factory by computer

seldom a need or reason to change or fiddle around with the sensor unless major component extensive engine work done

 

Hi did you fix problem . I hace same problem