Charlotte, NC Lift Installer?

I have a Supreme Suspension 3” Front / 1” Rear leveling kit that I am looking to get installed for my 2019 Tacoma. It is just a strut spacer and a diff drop spacer for the front and a 1” block in the rear. I am looking for a shop around the Charlotte NC area that will install it. I am 16 and new to the whole aftermarket world and don’t really know where to start with this process. Some help would be greatly appreciated

 

Any reputable tire shop that also handles shock/strut replacement should be able to do it. Also consider going ahead and have your needle bearing replaced with the ECGS bushing since you are going 3in in the front. That way you only have to pay for labor once

 

Try the regional forum for help in your area

 

Should be easy and cheap...Dont you only need the front lifted in the Carolina's?

 

Try NC4x4 forum. Primal 4wd or Tarheel 4x4 should be able to knock that out. Are you sure you want a 3in spacer lift? Get some prices and let me know, I may be able to help you out if time permits and you want to drive up here.

 

RimzOne in Mooresville is pretty good. I had my fox suspension installed there and their labor rates aren't super high.

They do require you supply aftermarket UCAs for any lift over 3 inches (also make sure they don't install it upside down)

 

I've been thinking about getting a lift and found https://bmfmotorsports.com/ in Pineville when I was looking a few months back. Keep me posted on where you go.

 

Go over to East Coast Gear Supply in Raleigh for the clam shell bushing install. Make an appt. they can do it fairly quick.

 

Tarheel 4x4 did good work for me several years ago on a Jeep I owned. Welded all the mounts to a Ford 8.8 axle in the correct geometry. They always have some pretty cool rigs sitting in their parking lot when I pass by.

 

Tyler at QC can get you hooked up. He is a sharp dude and does good work but that's a garbage kit you have and it'll cost more to install than you paid for the kit.

https://queencityoverland.net/