Aux/USB Relocation

So I just purchased a 2015 Tacoma and it has the aux/USB port. I hate that there is not a connector in the console. I've seen others splice wires and add a port. Not wanting to splice wires, has anyone had experience with this product as an alternative?

Goliton® USB & 3.5mm AUX Extension Flush Mount 2 Meter Audio Cable, 1/8 AUX Car Bike Boat Motercycle Lead

http://www.amazon.com/3-5mm-extension-Flush-Mount-Motercycle/dp/B00GPE9NZI#

 

maybe find a double din or a stereo wit usb and aux port in the back. . I know my pioneer has it in the front. but it would look funky

 

Well my thought was to unmount the port under the HVAC and connect this and zip tie behind the dash. Then just put a switch blank in the open slot. No wires, nice and clean.

 

Remove the OEM one from the dashboard. Plug male jacks from this one into female jacks on the OEM one. Hide OEM one behind dashboard. Run this one to desired location. Cut hole and install. Install switch blank where the OEM one sat.

I put one in my 2011. It only had the 3.5mm jack on the lower dashboard. It now has a 3.5mm jack and a USB port -

 

And where do we find this?