Are there any Grease points ?

Ok i feel real foolish asking this but I gotta know, lol. Are there any points that I should grease with a grease gun ? 2019 SR, EC, AT, I4. I did a search and couldn't find anything. Thank you for any help.

 

If it's a 4x4, the front driveshaft U-joints should have zerk fittings.

 

Might not. I spent 30 minutes taking off all the skids and running my fingers all through the two front u joints on 2020 TRD OT. There was not ONE zerk to be found in the front. On the 2016, you could at least feel the zerks when you got your fingers in there.

 

i just crawled under mine yesterday.. 2011, no zerk fittings on the front driveshaft....

 

oh i may be wrong,, this thread shows the zerk is accessed "inside" the area of the U-joint, not on the sides like the rear.

https://www.tacomaworld.com/threads...ma-access-cab-4x4-pick-up-w-v6-engine.379149/

 

My 2015 has them. On the front shaft they are on the inside of the spider. On the rear, they are on the end of a cap.

 

Beat me to it.

 

Thank you all for the great info, I wrote to Toyota and am waiting to hear from them, when I do I will report back .

 

My 2017 SR has them on the front driveshaft only.

 

Lol just slip a piece of cardboard under the truck, crawl under and look. The one going to the front diff is easy to see:

 

2016s have 5. 2017s and newer I believe only have 2 on the front drive shaft.

https://www.tacomaworld.com/threads/check-your-u-joints.409042/