AOB (Air On Board) - Light Blue Switches - Impressions? OCD Friendly!

Hi, I am wondering if anyone can post their impressions on the AOB light blue switches for the Tacoma that are supposed to match the OEM blue colour in Toyota's.

https://www.aironboard.com/online/products/switches/toyota-push-switches.html?color=288

• Does the AOB light blue illumination in fact match the OEM Toyota colour?
• Does the light level / output match the OEM Toyota switches?
• Does the colour of the lettering when the switch is not illuminated match the OEM Toyota switches?

Reason I ask (and it has been posted before in other switch threads) is that the "Amazon Mic-Tuning" switch I purchased does not match the blue colour, illumination level or non illuminated text colour (white'ish text for Toyota OEM vs gray for "Amazon Mic-Tuning" switch.

If you have photos you can post then

 

I got their CB button. The color match is pretty good, much better than the old "blue" ones.

The fit is good, size matches.

The feel and "shine" dont match though. The click is not like the OEM switches, its a little softer and the switch face wiggles a bit.
The surface is a little more shiny than the OEM switches, it looks a little blacker due to the shine


I have it in my dash, but its not hooked up yet. I can put some power to the wires and get it to light up for you this weekend.

 

@lapoltba did a comparison while working on plug and play 2Wheel Lo mod.

Take a look first post here

https://www.tacomaworld.com/threads/2lo-plug-play-harness-discussion.592035/#post-19804423

 

They are a little darker than the OEM switch color but it doesn’t bother me.

 

Does anyone know how to search for the "OE Toyota light blue" on their website?

 

They are currently sold out of them, so they dont show up, but here is the link for them.

https://www.aironboard.com/online/p...push-switches.html?color=288&toyota_model=293

 

Thanks man

 

Switches are back up, I just ordered some to replace my ch4x4 blue switches

 

Good looking out, thank you.

 

Do they have the Light Blue in the larger switches, to fit the 3 switch panel on the left from Caliraised?
Not seeing them on the website.

 

No, I just checked their site and it comes up with nothing for tall in the 288 color code.

 

For anyone interested, here is a side by side of the switches

 

Dang..
Does anyone make the larger switches in the correct color?
Or the 3 switch panel on the smaller size? (Left of wheel cubby)

 

Not that I know of, i do know you can replace the LED inside of the switches though. Im not sure the exact part number for the bare LED, but I think they are just standard "ice blue" LEDs. Somewhere on tacomaworld, someone posted the exact LED needed to make the switches match the OEM.

 

Kind of hard to tell but they look super close just a little bit off.

 

Yes, check @MESO website.

https://mesocustoms.com/collections/interior-accessories/products/tacoma-left-side-switch-panel

 

They are nearly 100% match, pictures of lights in a dark car are hard to get. The only thing that sucks about the switches is the light bleed between the on and off state.

 

Looks like all the 3 switch panels are the skinny/tall style due to a max width restriction.

There is a 2 switch here -
https://www.tacomaworld.com/threads...the-thing-i-wanted-didnt-exist.415922/page-37


Guess my colors will be off!

 

CP6.1W - Top: 4 Switches - Bottom: Cab light + Rear window + 1 Switch

Doesn't work?

 

On my 2019 the stock panel has bed light switch, power inverter (small), auto headlight (small) and a blank large that I dremeled to fit a RedArc trailer brake controler.

If I went with Mesos I would have to move the rear window and I guess move the redarc to the top? Also I think Mesos panel was like $60.

I did buy the Meso under AC panel a few months back. If I install that I gain another switch under the AC.. just didnt want to do the install unless I had to.