Alignment suggestions - CA SF Bay Area

I have a 2015 DCSB that I have put new front/rear OME springs and UCAs on. After the install, the truck drove great without an alignment done. I had the UCAs set as far out as possible. It gave it a bit of a upper tire out stance, but drove just fine. I had an alignment done at Oren Tire in San Leandro. The main change that they did was to the toe-in. Oddly, no change to the camber. However, now it pulls a bit to the right. Our roads are crap, so it is hard to find a flat road that has no crown. The issue can easily be seen on the freeway though. I took it back and there fix was to put more air into the passenger side tires. The tires should have been checked when they first aligned it, and that would not be a true solution anyway. Time to try some other place.

I live in the SF Bay Area (East Bay). Any places that you would recommend that knows how to align Tacomas?

 

Post up your specs page they should have given you.

 

Specs page below...

 

@Dcsleeper408 might know a good shop

 

@Barron2020 Auto Innovations in Milpitas. Ask for Orlando.

A few guys have recommended some places in castro valley? that might be closer to you. There been a few threads/posts on this subject.

Edit: Found 1 thread
https://www.tacomaworld.com/threads/best-norcal-bay-area-alignment-shop.702057/#post-24886436

 

@SUMOTNK Thank you sir. You are a gentleman and a scholar. I searched a bit before posting, but this one was probably lost in the list.