Aftermarket Power window to OEM switch

Has anyone done or does anyone one know how to wire a aftermarket power window to the oem switches ?

 

It would help to know what year, model, and engine you have?

 

It’s a 2000, sr5, 3.4 5vz

 

Do you already have the motor?
What window is it?
The Tacoma uses 2 wires to the motor.
The switch reverses power and ground to go Up or Down.

 

I currently have these type of door panels. Jimmy rigged the switches that came with the after market power windows into the door panels but I’m gonna switch to the newer style 02-04 panels and wanted the oem look using the oem switches with the aftermarket power windows.

 

These are the panels I’m switching to..

 

Heads up your existing speakers won’t work in the 2001-2004 door panels. You’ll need to cut away at the baffles or get the correct speakers and surround for them.

 

I don’t mind the speakers, mainly need to find out how to wire the oem switches to the after market motors... would it be easier swapping to oem motors ? I have the oem wiring harness and motors on the side.

 

If you have the Factory Harness and Motors I am guessing they were bought after the Aftermarket ones.

A DC motor is a DC motor it will take some testing to figure out just which wire does what.

Does the Aftermarket Switches come with a Master Switch for the left door ?

What year is your Factory Harness From ?

 

Yeah I recently got them to switch from after market to OEM.

yes the passenger does have a master switch

the truck I got the oem doors out of was a 00-03