A750E Temperature Sensor Locations.

Where are the temperature sensors located on the A750E transmission? If I'm not mistaken there should be 2, pan temp and converter temp. However I don't see either when under the truck looking at the transmission wiring harness. Are they located within the valve body itself? How can you get an accurate read on pan temp specifically when there is no sensor in the actual pan?

Thanks friends!

 

They are inside the Transmission.
Here is a good read
https://atracom.blob.core.windows.net/webinars/import/toyotaa750_a761_introduction.pdf

 

Thank you, GREAT read! I wonder how different ATF temps would read with a sensor in the actual pan in comparison to the sensor in the valve body? Aisin-Warner's recommendation for fluid level check is exactly 115 degrees in the pan itself.

 

Most guys go with the OBDII

An overwhelming amount of info can be found here
You’ll probably looking @ post #13.
https://www.tacomaworld.com/threads...th-pics-for-second-gen-4-liter-trucks.289913/

As for the differences? I couldn’t tell you.
I’ve only heard of a very few guys running a temp sensor in the pan.