-55 Offset steelies, aka 6th Gen Bronco Wheels?

Found a pretty good deal on a set of 5 Bronco take offs...17x7.5 wrapped in 265/70/17 Generals. Of course, based on my research, they are -55 offset which would mean they'd stick way too far out for a stock truck, correct?

 

Think those are +55 and would look good on Ranger.

 

That says negative -55 right there. I've never researched the wheels. I thought the sasquatch wheels had a positive offset in the 30s or 40s, which might be incorrect. I presumed the steel wheels would have a higher offset. Those are also 8.5 and not 7.5.

 

There was a guy recently who tried this with bronco Steelies, needed at least 2inch spacers to get them to not rub the uca. Center bore is too small too. Not worth it and need a lot of modification to fit

 

Pretty sure this is correct. But in either case - +55 or -55 - those wheels are too extreme for the Tacoma

 

That's what I figured lol. Eh, it was worth asking the question; appreciate it all, thanks!

 

The above rim is stamped 17x71/2 which is 7.5". Not 8.5"

 

My post was poorly worded.

Sasquatch wheels are 17×8.5https://accessories.ford.com/products/2021-bronco-17-x-8-5-beadlock-wheel-kit-sasquatch