| Brand | Titanium Plus Autoparts |
|---|---|
| Auto Part Position | Rear |
| Material | Alloy Steel |
| Color | Black |
| Vehicle Service Type | Cars |
| Exterior Finish | Black |
| Product Dimensions | 12.6"D x 68.31"W x 9.45"H |
| Manufacturer | Titanium Plus Autoparts |
| Manufacturer Part Number | FTIN-1004780 |
| OEM Part Number | R:406901 |
| ABPA Partslink Number | TO1103114 |
| Special Features | 5215104051 5204304010 5201504010 5201604010 5217804010 5217904010 5216204011 5216304021 5216404021 5215904020 5259104010 5259204010 5216904010 812700C010 816900C010 TO1103114 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Compatible With Toyota Tacoma Extended Cab Pickup Standard Cab Pickup Crew Cab Pickup 4Cyl 6Cyl 2.7L 4.0L Pre Runner X-Runner Base TRD Sport Prerunner Base Prerunner SR5 Prerunner TRD Sport TRD Pro Step Bumper |
Customers also search
Page 1 of 1Page 1 of 1
Product Description
Compare with similar items
This Item  Titanium Plus Autoparts black Rear Step Bumper Assembly with Pull Bar/Center Top Pad/End Bracket/License Lamp Compatible for 05-15 TOYOTA Tacoma TO1103114 |  |  |  |  |  | |
| Price | $178.88 | $176.90 | $179.92 | $176.50 | $419.00 | $179.00 |
| Delivery | — | Get it May 16 - 20 | — | Get it May 17 - 21 | Get it as soon as Wednesday, May 22 | Get it May 17 - 21 |
| Customer Ratings | ||||||
| Easy to install | ||||||
| Value for money | ||||||
| Sturdiness | ||||||
| Sold By | titaniumplusautoparts | 7BLACKSMITHS | CarPartsDepot | FAMETRADE LLC | ADI OFF ROAD | FAMETRADE LLC |
| compatible vehicles | Cars | Trucks | Cars | Trucks | Trucks | Trucks |
| auto part position | rear | rear | rear | rear | rear | rear |
| material | Alloy Steel | Alloy Steel | Alloy Steel | Plastic, Alloy Steel | Metal - Carbon Steel | Chrome,Plastic,Steel |
| exterior finish | Black | Black | Ready To Paint | Primer | Textured Coated | Chrome |
| part interchange | — | replacement | replacement | replacement | — | replacement |
Reviews with images
Not the best fit
Item quality seems ok, decent paint finish though i topcoated mine with bedliner to give it a textured finish matching my front winch bumper. Instructions were ok but could have been more detailed. I mounted this by myself but was able to align the fitment to “acceptable” meaning it does not sit nearly as tight to the body lines as my beat up 17yr old OEM bumper. It sits noticeably lower and the corners protrude away from the body on the sides (about 1” too wide at each corner). For the price i’ll live with the minor fitment issue because its already been modified and mounted but if i had a do-over i’d likely save a bit more and buy an offroad bumper. Potential buyers look at the photos others have posted before deciding on this. Some of the fitment photos others have posted seem a lot worse than mine, i found that pushing upwards with my knees while tightening the bolts from underneath resolved the majority of the sloped or angled fit some others have posted, just wish the corners fit closer to the body. I was able to put enough pressure on the ends to bend them slightly inward but still, photos are after that was done…
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on August 17, 2023
Size: AssemblyColor: BlackVerified Purchase
Good inexpensive replacement bumper but does not fit the body lines on the ends as well as the the original (as others have stated). Horrible directions but easy enough to figure out and install by myself. Had to install a new trailer hitch at the same time so removing the spare helped a lot.
Images in this review
Reviewed in the United States on May 24, 2023
Size: AssemblyColor: BlackVerified Purchase
Item quality seems ok, decent paint finish though i topcoated mine with bedliner to give it a textured finish matching my front winch bumper. Instructions were ok but could have been more detailed. I mounted this by myself but was able to align the fitment to “acceptable” meaning it does not sit nearly as tight to the body lines as my beat up 17yr old OEM bumper. It sits noticeably lower and the corners protrude away from the body on the sides (about 1” too wide at each corner). For the price i’ll live with the minor fitment issue because its already been modified and mounted but if i had a do-over i’d likely save a bit more and buy an offroad bumper. Potential buyers look at the photos others have posted before deciding on this. Some of the fitment photos others have posted seem a lot worse than mine, i found that pushing upwards with my knees while tightening the bolts from underneath resolved the majority of the sloped or angled fit some others have posted, just wish the corners fit closer to the body. I was able to put enough pressure on the ends to bend them slightly inward but still, photos are after that was done…
Images in this review
