I'd purchased the variety pack of 1/4 to 3/4" grommets, on the hope that one of the larger diameter grommets might fit a certain usage case for a small aftermarket add-on for a KLR650. In short, that's worked out quite well. The grommets are of a pliable but solid quality of material. In my initial usage case - explained shortly, as illustrated in the photo - the 1/2" grommet has worked out perfectly.
The KLR650 motorcycle has its clutch mechanism located on the right side of the vehicle. The handlebar clutch control on the bike operates a cable attached to pull rod. The pull rod enters the clutch housing through the top of the clutch case cover. That entry port may not appear to have been completely sealed by the manufacturer. From an external inspection, it looks like there may be some kind of a bushing there. However, I was concerned about the possibility of water, oil, or generally grime working its way down the surface of the pull rod and into the clutch housing area. Albeit, this may not present a great amount of concern but as one possible point of preventative maintenance, I thought it was worth the effort: To try to fit something onto the top of that clutch pull rod, where it enters the clutch cover housing, to at least prevent accumulation of grime at that port.
So, I picked up this variety kit of grommets from Gardner Bender, via this seller. In order to fit the grommet for this usage case, I first clipped the grommet longitudinally, across its diameter. Then, using some moderately sturdy metal scissors, I trimmed one surface of the grommet off along the circumference of the smallest-dimension part of the grommet. I didn't cut exactly in the middle of that section, but rather tried to cut as close as possible to the outer layer of the grommet. Subsequently, the modified part provided one flat rubberized washer with a longitudinal cut across its diameter. I then placed the item as pictured.
I'm certain that these grommets may have other uses, in household and automotive. Personally, I may be able to use the spare grommets e.g for any wiring add-ons for electrical system components on the vehicle - such as to add a grommet to an aftermarket switch, or to provide some general padding and sealing for where any new wires may pass through a hole in an add-on surface. They're working great for this particular mechanical usage case, sturdy stuff.
| Material | Steel |
|---|---|
| Size | 1 Count (Pack of 1) |
| Metal Type | Alloy Steel |
| Brand | Gardner Bender |
| Item Weight | 9.07 g |
| Color | Black |
| Number of Pieces | 5 |
| Item dimensions L x W x H | 1 x 1 x 1 inches |
| Manufacturer | Gardner Bender |
| Part Number | GHG-1538 |
| Item Weight | 0.32 ounces |
| Product Dimensions | 1 x 1 x 1 inches |
| Item model number | GHG-1538 |
| Is Discontinued By Manufacturer | No |
| Style | ⅜ Inch |
| Item Package Quantity | 1 |
| Number of Handles | 1 |
| Included Components | Rough Electrical^wire-terminals |
| Batteries Included? | No |
| Batteries Required? | No |
| Warranty Description | Warranty |
