I did a lot of research and this product gives strength to the claim that you can do a no holes solar panel installation.
I'm happy with the product it is a strong and well built. Looks like it had a good amount of surface area for the adhesive to use. I will add that they are hollow and it would be a better grip if it wasn't but...
Instructions seemed a little off...
So in my research I found that 3m vhb tape was the 1# go to for drill free installation.
So I got some 3m vhb tape 4950, sikaflex and eterna bond tape to hold it. Also de natured alc. And sand paper or surface prep.
NOTE. The surface prep is key you must have a good clean surface for a good bond.
If I could do it over again I would have done better surface prep.
My first misake was screwing the legs to the panel befor it was on the roof (im glad I didn't vhb or sikaflex the legs to the panel.) My roof had a slight pitch so I had to take off a few legs and re screw some so all the legs were flush to the roof for maximum bondage.
I put the legs on the panels on the roof
I put vhb tape on the bottom of all the legs.
Clean roof well let dry, mark corners, peel vhb tape, set, press and seal with sikaflex. Let it dry and cure then I added some eternabond tape as an extra precaution that stuff is strong.
Also to note had my panels on the feet bracket mount when I did the installation so I didn't get to seal the back of the legs. I'm going to just use a spray sealant like flex seal on that inside area.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
There is a newer model of this item:
Add a debit or credit card to save time when you check out
Convenient and secure with 2 clicks. Add your card
Frequently bought together
Top rated similar items
Page 1 of 1 Start overPage 1 of 1
From the brand
-
Since 2010 we have been on a mission to change the way the world uses energy. We are committed to making a lasting impact on the earth by removing barriers to sustainable living and energy independence.
Our mission is to empower the energy independence of 50M people with DIY-friendly and reliable renewable energy products by 2030.
We are optimistic humankind can achieve a sustainable future where renewables are at the core of our energy supply.
-
-
-
-
-
-
-
-
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
1:44
Click to play video
Renogy Cable Entry Housing Installation Overview
✅ Matt Donley
Compare with similar items
This Item  Renogy Corner Bracket Solar Panel Roof Drill-Free Mount for RV, Boats, 1 Set |  |  |  |  |  | |
| Price | -32% $24.99 List: $36.99 | $21.99 | $20.00 | $8.99 | -28% $24.53 List: $33.99 | -32% $27.19 List: $39.99 |
| Delivery | Get it as soon as Tuesday, May 14 | Get it as soon as Tuesday, May 14 | Get it as soon as Tuesday, May 14 | Get it as soon as Tuesday, May 14 | Get it as soon as Tuesday, May 14 | Get it as soon as Tuesday, May 14 |
| Customer Ratings | ||||||
| Sturdiness | ||||||
| Easy to install | ||||||
| Sold By | Amazon.com | Cxeny-US | Trisinger | Inverters-R-US | FTJ Power | Amazon.com |
Reviews with images
Wide base that helps with adhering to surface but adds 2.5 inches to each side.
Holds panels snuggly, I also drilled pilots and used screws to ensure the panels would stay in the brackets. I then sealed them to the roof without using any screws. They are bigger than normal brackets and added 2.5 inches to each side or 5 inches to width and 5 inches to length. I was originally planning on mounting them vertically but ran out space and had to go horizontally. I would buy them again and the price was better than other similar options.one more consideration, I also added a safety strap that attached to the cross bar, just in case they break free. Not a big concern, but they are sealed to roof without screws and at highway speeds the panels would be a problem if they came off.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on August 1, 2023
one more consideration, I also added a safety strap that attached to the cross bar, just in case they break free. Not a big concern, but they are sealed to roof without screws and at highway speeds the panels would be a problem if they came off.
Color: Corner BracketVerified Purchase
Wide base that helps with adhering to surface but adds 2.5 inches to each side.
Reviewed in the United States on August 1, 2023
Holds panels snuggly, I also drilled pilots and used screws to ensure the panels would stay in the brackets. I then sealed them to the roof without using any screws. They are bigger than normal brackets and added 2.5 inches to each side or 5 inches to width and 5 inches to length. I was originally planning on mounting them vertically but ran out space and had to go horizontally. I would buy them again and the price was better than other similar options.Reviewed in the United States on August 1, 2023
one more consideration, I also added a safety strap that attached to the cross bar, just in case they break free. Not a big concern, but they are sealed to roof without screws and at highway speeds the panels would be a problem if they came off.
Images in this review
Reviewed in the United States on May 23, 2023
Color: Corner BracketVerified Purchase
These mounts seem very sturdy. Yes they're made of plastic but it's not flimsy at all. There are areas for using screws if you'd rather go that way, just have to drill the holes. We'd rather not put any holes in the roof so we're using sikaflex 252 to mount both the panels to the mounts and the mounts to the roof. Just got em today so we haven't installed them yet but will update when we do. The only thing I don't like about these mounts is they're not made in the USA..I'll let you guess where they are made.
Images in this review
Top reviews from other countries
alvaro
SIN PERFORACIONES EN EL TECHO
Reviewed in Mexico on May 4, 2023Color: Corner BracketVerified Purchase
alvaro
Reviewed in Mexico on May 4, 2023
Images in this review
