Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Hard Rock apparel
Outerwear, tees, and accessories. Discover the rock shop.
Frequently bought together
$19.28
Get it as soon as Thursday, May 16
In Stock
+
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Related Climate Pledge Friendly items
Page 1 of 1 Start overPage 1 of 1
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Compact by Design (Amazon-developed Certification)products have reduced water and/or air in the product or packaging for more efficient transportation.
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Compact by Design (Amazon-developed Certification)products have reduced water and/or air in the product or packaging for more efficient transportation.
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Climate neutral by ClimatePartner certifies the carbon footprint of a product was calculated and all associated emissions were offset.
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
USDA Organic products are grown and processed according to the USDA Organic standards addressing soil and water quality, among other factors. Organic is protected by law, inspected by experts, traced from farm to store, and shaped by public input.
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
The Nordic Swan Ecolabel certified products meet requirements on chemical usage, resource consumption, greenhouse gas emissions and biodiversity.
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Compact by Design (Amazon-developed Certification)products have reduced water and/or air in the product or packaging for more efficient transportation.
From the manufacturer
AT-205 Re-Seal - How it works
|
|
|
|
|
|---|---|---|---|
AT-205 added to leaking systemAT-205 Re-Seal is added to any leaking engine, transmission, power steering system, differential or hydraulic system (except for brakes) to condition rubber seals/gaskets and stop leaks. Simply pour it in as you would be filling it with oil or fluid. |
The formulation blends with the oilThe additive blends with oil in the system and is circulated throughout during operation, treating and conditioning rubber seals and gaskets. |
Conditions and rejuvenates sealsAT-205 is a plasticizer, a type of chemical used in rubber manufacturing to set hardness and flexibility. As a seal or gasket gets older it can dry out, harden and wear - treating it with AT-205 will rejuvenate it, restoring it's flexibility and sealing properties. |
Most leaks resealed within 5 hoursAs long as the seal or gasket is not severely damaged or torn, the leak is resealed after a total of 5 hours of driving - saving time and money from costly repairs. |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
0:09
Click to play video
Customer Review: Amazing product!! Highly recommend
Edwin R.
Videos for this product
0:10
Click to play video
Customer Review: Differential / axel seal
Juan Soriano
Reviews with images
Just F'in wow....
Bought a 2013 honda accord v6 automatic with 80 000 miles.. both front and rear main seals were peeing oil... reason I got it for a great deal below market... since the labor to do these seals means dropping engine out the bottom... it sucks... but I was ready to do it.... figured try this stuff out first. Why not? Let me tell ya and show ya. This stuff has just saved me an entire weekend of work... or 800 dollars at a shop... I'd tried two local parts stores versions of stop main seal leak stuff... while waiting for this to arrive.. neither did much.... with multiple days of driving .... cycling the engine etc... . Within 96 hours of this being in motor, look at pics.. before and after... just wow.... well worth the purchase. The before pic was from parked 30 min. The after pic is after overnight... will be buying 5 more....for just in case ... just wow...
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on May 22, 2019
Size: 1 Count (Pack of 1)Verified Purchase
Scotty Kilmer said AT-205 is watery and harmless because it’s a polymer. I’d never heard of a watery polymer. ATP calls it a plasticizer. A plasticizer is a solvent used to make a polymer more rubbery by loosening the bonds between molecules. This one seems to be diethylene glycol monoethyl ether.
ATP says it won’t harm internal components. The website says it’s compatible with conventional and synthetic oils, ATF, gear oil, power steering fluids, and hydraulic oil. It has a 3-minute video, which for 5 seconds presents a chart of recommended amounts with three columns of seven figures each. Do they really expect you to digest that in 5 seconds?
For those 5 seconds there are two lines of print below the chart. If you pause the video, they are grayed out and covered with ads. I had to replay that segment several times to be sure I understood. They say, “Recommended use is approximate due to blending properties with oil. No risk if slightly over treated.”
Contrary to their assurances, this implies a risk. It seems as if ATP did not intend for the viewer to see the warning.
The video devoted a minute to showing the representative open a hood, pour in a bottle of AT-205, and close the hood. An Amazon customer reported that after he did so, the concentrated solvent in the oil pan caused the paint to come loose and clog the screen on his oil pump. It’s not a new product, but the video didn’t recommend running the engine to mix the solvent. Buyer beware!
My 35-year-old car occasionally smoked on startup. Probably the valve seals were worn or shrunken. Deposits from oil additives damaged spark plugs and O2 sensors. AT-205 would be a lot cheaper than having the seals replaced, but I was afraid AT-205 could expand seals more than necessary, and that could accelerate wear.
For 4 quarts, ATP recommends 6oz, or 180ml. The oil would have about 4.7% solvent. I decided to try 100ml (about 2.7%) and add the rest if necessary. I used a polypropylene measuring cylinder. It measures precisely, pours as neatly as using a funnel, and rinses better than glass. I ran a short errand to mix it and ran another short errand the next day. Then I cleaned the grime below the valve cover gasket, which leaked.
Months have passed. The gasket has not leaked, and I haven’t seen or smelled any oil smoke.
My riding mower was 25 years old. An unseen oil leak caused chaff to accumulate on the cooling fins, hidden under the housing. That interfered with the flow of cooling air. It often smoked on startup. I didn't know if leaky rubber seals caused either problem.
I added 25ml of AT-205, about 1% of the oil in the crankcase. I mowed a few minutes to mix it. The next day, I cleaned off the oil and grime. in the months since then, the engine has stayed clean, and it hasn't smoked on startup.
The next time I have a leaky machine, I’ll start with 0.5% to minimize risk. I can always add more.
Update: Scotty was right about using AT-205 to preserve plastic parts. My positive battery terminal protector uses a "living plastic" hinge. It had stiffened so that it wouldn't stay down. A couple of applications of AT-205 improved it. My big concern was the duct from the MAF meter to the throttle. It had become brittle over the years. It looked impossible to fabricate a new one with all those hose fittings. I've applied AT-205 three times. A little goes a long way. I put a teaspoon or so in a cup and apply it with a cotton ball. I also wipe it on pneumatic hoses. Plastic absorbs it slowly, so I check after a couple of days. Skin absorbs it readily, but research has shown it's harmless (pharmacologically inert).
Another update: The manufacturer of my mower engine recommends oil changes according to engine hours and doesn't mention time intervals. I waited two years. During that time, the oil continued to feel and smell okay.
Two weeks after the oil change, I got a lot of oil smoke on startup. I had assumed that the solvent not immediately absorbed by the rubber had evaporated from the old oil long ago. Apparently it had stayed in the oil, continually refreshing the old seals. Because I'd used it conservatively, I had some on hand to supplement the new oil.
ATP says it won’t harm internal components. The website says it’s compatible with conventional and synthetic oils, ATF, gear oil, power steering fluids, and hydraulic oil. It has a 3-minute video, which for 5 seconds presents a chart of recommended amounts with three columns of seven figures each. Do they really expect you to digest that in 5 seconds?
For those 5 seconds there are two lines of print below the chart. If you pause the video, they are grayed out and covered with ads. I had to replay that segment several times to be sure I understood. They say, “Recommended use is approximate due to blending properties with oil. No risk if slightly over treated.”
Contrary to their assurances, this implies a risk. It seems as if ATP did not intend for the viewer to see the warning.
The video devoted a minute to showing the representative open a hood, pour in a bottle of AT-205, and close the hood. An Amazon customer reported that after he did so, the concentrated solvent in the oil pan caused the paint to come loose and clog the screen on his oil pump. It’s not a new product, but the video didn’t recommend running the engine to mix the solvent. Buyer beware!
My 35-year-old car occasionally smoked on startup. Probably the valve seals were worn or shrunken. Deposits from oil additives damaged spark plugs and O2 sensors. AT-205 would be a lot cheaper than having the seals replaced, but I was afraid AT-205 could expand seals more than necessary, and that could accelerate wear.
For 4 quarts, ATP recommends 6oz, or 180ml. The oil would have about 4.7% solvent. I decided to try 100ml (about 2.7%) and add the rest if necessary. I used a polypropylene measuring cylinder. It measures precisely, pours as neatly as using a funnel, and rinses better than glass. I ran a short errand to mix it and ran another short errand the next day. Then I cleaned the grime below the valve cover gasket, which leaked.
Months have passed. The gasket has not leaked, and I haven’t seen or smelled any oil smoke.
My riding mower was 25 years old. An unseen oil leak caused chaff to accumulate on the cooling fins, hidden under the housing. That interfered with the flow of cooling air. It often smoked on startup. I didn't know if leaky rubber seals caused either problem.
I added 25ml of AT-205, about 1% of the oil in the crankcase. I mowed a few minutes to mix it. The next day, I cleaned off the oil and grime. in the months since then, the engine has stayed clean, and it hasn't smoked on startup.
The next time I have a leaky machine, I’ll start with 0.5% to minimize risk. I can always add more.
Update: Scotty was right about using AT-205 to preserve plastic parts. My positive battery terminal protector uses a "living plastic" hinge. It had stiffened so that it wouldn't stay down. A couple of applications of AT-205 improved it. My big concern was the duct from the MAF meter to the throttle. It had become brittle over the years. It looked impossible to fabricate a new one with all those hose fittings. I've applied AT-205 three times. A little goes a long way. I put a teaspoon or so in a cup and apply it with a cotton ball. I also wipe it on pneumatic hoses. Plastic absorbs it slowly, so I check after a couple of days. Skin absorbs it readily, but research has shown it's harmless (pharmacologically inert).
Another update: The manufacturer of my mower engine recommends oil changes according to engine hours and doesn't mention time intervals. I waited two years. During that time, the oil continued to feel and smell okay.
Two weeks after the oil change, I got a lot of oil smoke on startup. I had assumed that the solvent not immediately absorbed by the rubber had evaporated from the old oil long ago. Apparently it had stayed in the oil, continually refreshing the old seals. Because I'd used it conservatively, I had some on hand to supplement the new oil.
Images in this review
Top reviews from other countries
bradley long
worked great
Reviewed in Canada on April 25, 2024Size: 1 Count (Pack of 1)Verified Purchase
Emilio Heredia
Me ahorró la reparación en el taller mecánico
Reviewed in Mexico on June 28, 2023Size: 1 Count (Pack of 1)Verified Purchase
Trev
This really works.
Reviewed in the United Kingdom on March 1, 2024Size: 1 Count (Pack of 1)Verified Purchase
vikash kumar bhagat
Excellent product
Reviewed in India on March 29, 2022Size: 1 Count (Pack of 1)Verified Purchase
Howard T
It works !
Reviewed in Australia on April 22, 2024Size: 1 Count (Pack of 1)Verified Purchase
